top of page

Solar Faults and How to Fix Them | Yanchep

Writer: Nolan
Nolan
Oct 22
7 min read

Your solar system ran quietly for years. Then the app shows a flat line, or the inverter starts blinking red. Most faults come from a short list of causes, and some cost very little to sort out. Others are electrical hazards that only a licensed person should touch. This guide covers the faults Yanchep households see most, what repairs usually cost and the checks you can safely do from the ground. It also shows how to pick a solar service provider you can ring again next year. Equipment sold as a Solar Panel for Western Australian homes still has to cope with salt air and swings in grid voltage, so local experience matters.


solar-faults-how-to-fix-them-yanchep-1

Why Solar Systems Develop Faults Near the Coast

Yanchep sits on the coast, and that shapes which problems turn up. Salt mist can trigger insulation resistance faults, so coastal homes suit an inverter rated for salt mist corrosion under IEC 61701. The grid plays a part too. The most common inverter error in Australia is an overvoltage fault, and the grid causes it, so the inverter itself is often fine. Western Power's installer guidance says excess voltage rise can cause nuisance tripping, and inverters have a mode that trims output to stay inside voltage limits. That behaviour is normal.


Age matters as well. String inverters last roughly 5 to 12 years, so most systems need at least one replacement during the life of the panels. Solar Analytics, citing government data, says more than half of residential systems underperform, and inverter faults make up almost half of major failures. Newer systems tend to have less faults than ones from a decade ago.

A Residential Solar Panel array often keeps producing something while a fault builds. Many owners only notice when the electricity bill jumps.


Common Solar Faults and Their Fixes

Fault

What you notice

Likely cause

Usual fix

Inverter error or no output

Red or flashing light, blank display

Component wear, overheating, grid trips

Read the code, restart once per the manual, then call a licensed technician

Overvoltage trips

Shutdowns on sunny days, grid voltage code

High local voltage with many solar homes nearby

Installer checks cable losses and voltage response settings

Earth or insulation fault

Alarm after rain or salty weather

Moisture in a cable or junction box, ageing DC isolator

Licensed electrician only, no repeated resets

Dirty or shaded panels

Low output, one roof section weak

Dust, bird droppings, new tree growth

Clean from ground level, trim branches

Cracked panels

Hotspots, slow output loss

Hail, falling branches, rough handling

Thermal inspection, replace damaged panels

Loose or chewed wiring

Output that comes and goes

Corroded terminals, possums, birds

SAA accredited installer repairs the wiring

App or Wi-Fi dropout

Flat line in the app, inverter looks fine

Router change, firmware bug

Restart router and app, compare with the inverter display

Resetting an inverter with an active earth fault does not fix the problem and can hide a genuine safety hazard. Earth faults can make a metal roof, gutters and panel frames live with dangerous DC voltage. A faulty DC isolator is a fire risk and should be replaced straight away.


Just Solar Co handles this kind of work through its repairs service. Its electricians diagnose inverter fault codes and communication problems across major brands, and they bring older systems up to date with new inverters or compliance changes.


solar-faults-how-to-fix-them-yanchep-2

What Solar Repairs Cost

The figures below are national estimates from a 2026 repair guide, so Perth quotes can differ.

Minor wiring fix (low)         █               $150
Minor wiring fix (high)        ██              $400
DC isolator swap (low)         █               $200
DC isolator swap (high)        ██              $500
Single panel (low)             █               $300
Single panel (high)            ███             $800
Inverter replacement (low)     ██████          $1,500
Inverter replacement (high)    ██████████████  $3,500

1 block = about $250

Source: Why Solar repair and replacement guide, 2026. National estimates in AUD, and panel prices exclude labour.

A diagnostic visit usually costs $150 to $300. That fee is worth paying before you approve a bigger job.

Situation

Better move

Inverter failed, panels still producing well

Replace the inverter

One or two damaged panels

Replace them if a matching model exists

Many damaged or weak panels

Get a full system assessment first

System over 15 years old with several faults

Weigh a full replacement

Wiring or isolator fault

Repair immediately for safety

If a repair costs more than 40% of a new component, replacing it usually pays off. Expect a inverter swap to take 2 to 4 hours. A hybrid inverter costs slightly more, but it makes the system battery ready, so if you plan to add Battery Storage within a few years you avoid paying for two changes.


Check your warranty before paying. Inverters usually carry 5 to 10 years of cover and panels about 25 years. A cracked panel can loose output slowly, so photograph the damage and keep your invoices and serial numbers.


Safe Checks Before You Call a Technician

Start at the inverter display and read any code. Look over the panels from the ground for dirt, debris or new shade, compare today's output with the app history, and check that no breaker has tripped. If nothing changes, book an SAA accredited installer. Its worth comparing output with the same month last year. Panels lose about 0.5% a year, and seasonal changes move the numbers too. New tree growth can effect output more than people expect. Shade is easy to misjudge at midday, since early morning and late afternoon shadows can cross the array.


What to Leave Alone

Panels keep generating voltage even if the system looks switched off, so DIY work on wiring, junction boxes or the inverter is dangerous and needs a licence. Do not climb onto the roof to clean panels, and do not keep resetting an inverter that shows the same fault. Write down the exact message and hand it to the installer. After heavy rain watch for earth fault alarms. Moisture and old plastic DC isolators are frequent triggers.


Insight: Dust and shade alone can cut output by up to 25%, and the inverter light stays green the whole time. A monthly look at the daily totals in your app costs nothing and catches this early.


solar-faults-how-to-fix-them-yanchep-4

Choosing a Solar Service Provider in Yanchep

A good solar service provider holds SAA accreditation, knows your inverter brand and gives a written quote covering diagnosis, parts, labour and any warranty on the repair. Ask directly whether the job is a proper fix or a patch on a bigger problem. An honest repairer will tell you.

Many solar panel installers focus on new sales, so ask whether they also service systems they did not fit. Any SAA accredited installer or licensed electrician with solar experience can work on your system, and panel and inverter warranties stay valid, though the installer's workmanship warranty ends if the company closes. Size matters too. A commercial solar panel installer usually handles larger business arrays, while a residential team suits most homes.


Just Solar Co services Yanchep, Two Rocks, Lancelin, Wanneroo and Joondalup, uses in house SAA electricians with no subcontractors, and offers support after installation. It covers Residential Solar Panel work, home Battery Storage and EV Charger Installation alongside repairs.


New Home Buyers

If the roof already has panels, ask the seller for the original solar panel installation paperwork, the inverter model and age, and any warranty documents. An inverter near the end of its 5 to 12 year range may need replacing at $1,500 to $3,500, so budget for it.

Apartment Owners

If your building has a shared rooftop array, report faults to the owners corporation or strata manager so they can book a licensed technician. Larger shared systems sometimes sit with a commercial solar panel installer, so check the maintenance contract.

Rural and Regional Residents

Two Rocks and Lancelin are both on Just Solar Co's service list. Western Power notes that feeders with many solar connections or long runs can see more nuisance tripping, so ask your technician to check voltage rise on your property.

Upgrading After the Repair

Once the fault is fixed, plan the next step. A new EV Charger Installation adds load, so have the electrician confirm your system and switchboard can handle it. For Battery Storage, the federal rebate changed on 1 May 2026, with smaller batteries getting the full discount and larger ones a reduced rate, so get a current quote before you sign.


FAQs

Why is my solar inverter showing a red light?

A red or flashing light means the inverter has logged a fault. Grid voltage trips, overheating, moisture and component wear are common causes. Note the exact code, restart once following the manual and check the breakers. If the light returns, call a licensed technician.


How much does solar panel repair cost in Western Australia?

National estimates put minor repairs at $150 to $400, an isolator at $200 to $500, a single panel at $300 to $800 plus labour, and a string inverter replacement at $1,500 to $3,500. Perth quotes may differ, so ask for a written breakdown before approving work.


Can I fix solar panel problems myself?

Only the safe jobs. You can check the display, restart the system per the manual, look over panels from the ground and rinse them with a hose. Wiring, roof work and inverter internals need an accredited installer, since solar equipment can stay live even with mains power off.


How often should solar panels be serviced?

Guidance from the Clean Energy Council and Solar Accreditation Australia points to a professional inspection at least every two years, with a visual check every few months. Regular servicing catches faults early and protects your warranty. Choose a Solar Panel for Western Australian conditions and have it inspected on schedule.


What should I look for in a solar service provider in Yanchep?

Look for Solar Accreditation Australia accreditation, experience with your inverter brand and a written quote covering diagnosis, parts, labour and repair warranty. Ask whether they service systems they did not install. A local solar service provider who stays reachable after the job is worth more than a cheap one-off quote.


Solar acting up at your Yanchep home? Just Solar Co sends in house SAA electricians to find the fault, and can follow up with Battery Storage or EV Charger Installation once the system is sound. As a solar service provider covering Yanchep, Two Rocks, Lancelin and Wanneroo, the team works on every Solar Panel for Western Australian home it services. Call 08 6337 4019 or book a free solar assessment at https://www.justsolarco.com.au/contact-us.

bottom of page