Solar Service Provider Tips for Ellenbrook Residents

Choosing a solar service provider in Ellenbrook comes down to three checks: who installs the system, what hardware goes on your roof, and whether the size suits your home. This guide covers those checks, the 2026 rebates and the questions each type of household should ask before signing.
Quick answer: a typical 6.6kW system in Ellenbrook costs about $5,460 to $7,875 after the federal rebate. The best-value provider usually has accredited in-house installers, an itemised quote and support after installation.

Why solar suits Ellenbrook homes
Ellenbrook gets about 5.3 peak sun hours a day, above the national average. Most homes are freestanding houses with open roofs, and public postcode data shows more than 8 in 10 already have solar. That is far above the Western Australian average.
Ellenbrook solar snapshot | Typical figure |
Peak sun hours | About 5.3 per day |
Homes with rooftop solar | Roughly 83% to 86% |
Average system size | About 5.5kW |
6.6kW system cost after rebate | $5,460 to $7,875 |
Federal STC discount on 6.6kW | About $1,779 |
Small-scale installs recorded since 2001 | Over 13,000 |
Figures are estimates from public postcode data and change with roof, brand and quote.
How to choose a solar service provider
Every solar service provider says it is the best. Use these checks to compare solar panel installers on facts.
Check accreditation and licences
Look for Solar Accreditation Australia (SAA) accreditation and a current electrical licence. Both should appear on the quote.
Ask who does the work
Find out if in-house electricians install the system or if the job goes to subcontractors. One team that designs, installs and services the system is easier to hold to account.
Compare itemised quotes
A good quote lists the panel and inverter models, panel count, system size, warranties and inclusions. The lowest price can hide weaker hardware.
Match the provider to the job
A home needs a residential specialist. A shop or workshop needs a commercial solar panel installer who can size the system around daytime load. Just Solar Co, for example, uses in-house electricians, holds SAA accreditation and fits Tier-1 panels on custom-designed systems.

Solar panel installation and system size
Most Perth homes run 6.6kW of panels on a 5kW inverter. That suits single-phase supply and WA export rules, and it means about 15 panels over 30 square metres of unshaded roof. A couple or small family with quarterly bills of $300 to $500 usually suits 6.6kW. A family with ducted air-conditioning, a pool pump or an EV often suits 10kW. Choosing a solar panel for Western Australian summers means checking heat performance and warranty terms. A Residential Solar Panel system should face north where the roof allows. Most home installs are exempt from planning approval, though your installer still handles the grid connection.
Battery storage rebates for Ellenbrook homes
Battery Storage now gets help from two schemes. The federal Cheaper Home Batteries Program takes roughly 30% off the upfront cost, and the WA Residential Battery Scheme adds a rebate and a no-interest loan.
2026 battery support | What you get |
Federal Cheaper Home Batteries Program | Full discount on the first 14 kWh, 60% on 14 to 28 kWh, 15% on 28 to 50 kWh. About $2,450 on 10 kWh in late 2026. Steps down every six months |
WA rebate, Synergy (includes Ellenbrook) | Up to $1,300 |
WA rebate, Horizon Power (regional WA) | Up to $3,800 |
WA no-interest loan | Up to $10,000 over 10 years, household income under $210,000 |
State scheme conditions | Approved battery, accredited vendor, VPP participation |
A battery lifts upfront cost, so payback runs longer than for panels alone. The return is evening power, blackout protection and VPP earnings. Ask for a battery-ready system now, even if you add storage later. Also check that your installer is on the Plenti vendor directory, because only listed vendors can claim the state rebate.

Tips by household type
Families and homeowners
Size the system to your daytime use. Plan EV Charger Installation during the same solar panel installation visit, so the installer checks switchboard capacity once.
New home buyers
Ask the builder about roof direction and meter box space before handover. A battery-ready system now saves rework later.
Rural and regional residents
Regional addresses on the Horizon Power network can claim up to $3,800. Check which network supplies your property before you request quotes.
Apartment owners
Roof space is usually common property, so body corporate approval comes first. Ask the committee about a shared system and the rules for EV chargers in your car bay.
FAQs
How much do solar panels cost in Ellenbrook?
A typical 6.6kW system costs about $5,460 to $7,875 after the federal STC rebate, which is worth about $1,779 on that size. Price changes with panel brand, inverter, roof type and switchboard work. Compare itemised quotes instead of headline prices. Ask the quote to show the rebate separately.
Is solar worth it in Western Australia?
For most homes, yes. Perth has some of the lowest system prices in Australia, and a well-sized system commonly pays back in about four to seven years. Savings come mainly from using your own power in the daytime, because export rates are low. A site visit gives a firm figure.
What solar rebates are available in WA in 2026?
The federal STC discount for panels is built into your quote. For batteries, the federal program gives roughly 30% off, and the WA scheme adds up to $1,300 for Synergy customers plus a no-interest loan of up to $10,000. A VPP is required for the state rebate. Confirm both with your installer.
What size solar system do I need?
Most Perth couples and small families suit 6.6kW, which is about 15 panels. Homes with ducted air-conditioning, a pool or an EV often suit 10kW. A good provider checks your bills before recommending a size. Roof space and shading also limit the final size. Ask for a quote at two sizes.
Do I need council approval for solar panels in Ellenbrook?
Most home rooftop systems in WA are exempt from planning approval under the Planning and Development Regulations 2015. Your installer still lodges the grid connection application. Strata properties need body corporate approval first, so ask your committee early. Ask your installer to confirm this for your property.
Ready to talk to a local solar service provider? Just Solar Co designs and installs Residential Solar Panel systems, Battery Storage and EV Charger Installation across Ellenbrook and Perth's northern suburbs, using in-house electricians and Tier-1 panels. Book your free solar assessment at justsolarco.com.au or call 08 6337 4019.
.png)


